Back to Blog
How-to Guides 2026-11-17 Bert Frank | Bert Frank - Modern & Mid Century Designer Lighting 0 views

FAROL PENDANT on a Sloped Ceiling: Choosing the Right Drop Length

FAROL PENDANT on a Sloped Ceiling: Choosing the Right Drop Length

Planning a FAROL PENDANT for a sloped ceiling? Work out your drop length, plan a linear run, and know what to confirm with Bert Frank before you order.

The drop is fixed at order, so plan the slope first

A sloped ceiling changes the order in which you make decisions. On a flat ceiling you can choose a drop length and hang the pendant more or less anywhere. Under a vaulted or pitched ceiling, the ceiling height varies across the room, so the drop you need depends on where the fitting sits and what it hangs over.

With the FAROL PENDANT, this matters more than usual: the brass rod drop length must be specified at the time of ordering. You cannot adjust it later by trimming or extending the rod. That makes the drop a design decision to settle before you buy, not a detail to fix on installation day.

A practical sequence for a sloped ceiling

Work through these in order, because each step narrows the next.

  1. Fix the pendant position first: Decide exactly where the FAROL will hang and what it will sit above. Under a slope, moving the fitting even a short distance sideways changes the ceiling height above it, and therefore the drop you need.
  2. Measure the ceiling height at that position: Measure at the mounting point itself, not at the room's highest or lowest point. A slope means those numbers can be very different.
  3. Set your target height for the shade: Decide where you want the bottom of the glass shade to sit relative to the surface below it. This is the reference point that turns a ceiling measurement into a drop length.
  4. Convert to a drop length: The drop is the distance from the ceiling down to the shade. Subtract your target shade height from the ceiling height at the mounting point to get the drop you need to specify.
  5. Note the lead time: The FAROL has a standard lead time of 10 to 12 weeks plus shipping, so a drop length decided late delays the whole installation.

Why a linear arrangement needs one drop per shade

The FAROL is designed to be enhanced when installed as part of a linear arrangement, and a row of pendants is a natural fit for a long dining table or island. On a sloped ceiling, though, a row of identical drops will not sit level: each shade hangs from a different ceiling height.

If you want the shades to line up along the bottom, each pendant in the run needs its own drop length calculated from the ceiling height at its own mounting point. Treat the row as a set of individual measurements rather than one figure repeated. Decide the shade alignment you want first, then calculate each drop to suit it.

What the FAROL PENDANT record confirms

  • FAROL PENDANT: The brass rod drop length must be specified at the time of ordering. There is no later adjustment, so the drop has to be resolved before you commit.
    FAROL PENDANT
    FAROL PENDANT
  • FAROL PENDANT: Bert Frank asks customers to write to [email protected], referencing their order number, to let them know the required drop height. This is the confirmed route for supplying your measurement once you have it.
  • FAROL PENDANT: Standard lead time is 10 to 12 weeks plus shipping. Build the drop decision into your project timeline rather than leaving it until the electrician is booked.

Choosing a finish for a sloped ceiling

The FAROL comes in four metal finishes — Brushed Brass, Antique Brass, Dark Bronze and Satin Nickel — each with either an Opal or Smoked glass shade. On a pitched ceiling, the metal finish is the part you will mostly see from below, so pick it against the ceiling colour and the room's other metals rather than in isolation.

The glass choice changes the character more than the metal does. Opal reads as a soft, even cylinder; Smoked gives the shade more presence when unlit. Because each shade is hand-blown in Poland, small air pockets in the glass are a normal part of the piece rather than a fault — worth knowing before you inspect a delivery under a bright ceiling.

What to confirm before you order

The supplied information does not include installation steps, wiring requirements or a maximum or minimum drop length, so treat those as questions for Bert Frank rather than assumptions. Before ordering, confirm that your intended drop is achievable, that the ceiling structure at the mounting point suits the fitting, and that your electrician is content with the arrangement — a qualified installer should handle the electrical work.

Write your drop height down in the same units you measured in, keep it with your order number, and send it to [email protected] as instructed. On a sloped ceiling, that single number is the decision everything else depends on.

Related Articles

Customer Service
Home
Products
Cart
Profile