Start with the stairwell's sightlines, not the fitting
Stairs and landings are viewed from unusual angles: you see the wall while climbing, from the landing above, and from the room below. Before choosing a position for the SABLIER Wall Light, walk the stair and note where your eye naturally lands. That is where a sculptural wall light will be seen most often, and where its frosted glass shades and brass detailing will have the most impact.
The SABLIER is a substantial piece: oversized frosted glass shades paired with solid brass components, with a backplate that features cut-out detailing. On a narrow stair, that depth matters as much as the height. Check that the fitting will not crowd the handrail or sit where a shoulder could catch it.
Placement checkpoints for stairs and landings
- Sightline from the bottom step: Stand at the foot of the stairs and look up. A light placed on the wall you face as you climb will be seen head-on; one on a side wall will be seen in profile. Decide which view you want to dominate.
- Landing wall space: Landings often have a short, wide wall that suits a single statement fitting. Check the available width against the SABLIER's proportions before committing.
- Handrail and head clearance: Keep the fitting clear of the handrail line and any point where a person might lean or pass close. The SABLIER's shades project from the wall, so allow for that depth.
- Daylight and evening use: Note how daylight falls on the wall during the day and where you need light after dark. A landing that is bright by day may still need a focal light at night.
- Switch access: Confirm how the light will be switched before installation. The supplied record does not specify switching or dimming compatibility, so raise this with your electrician early.
How high to mount wall lights on stairs: a practical approach
There is no single correct height for a stair wall light. The right height depends on the stair's pitch, the wall's height, and whether the light is meant to illuminate the treads or simply be seen. A useful method is to mark the proposed centre point on the wall with tape and view it from the bottom, middle and top of the stair. Adjust until the fitting feels balanced from all three positions.
For a sculptural piece like the SABLIER, visual balance usually matters more than task lighting. The frosted shades soften the light, so the fitting reads as a glowing form rather than a bright downlight. That makes it well suited to a landing or a stair wall where atmosphere is the goal. The supplied record does not include beam angle, brightness or dimming specifications, so confirm those details with your electrician or the manufacturer before finalising the position.
What the SABLIER record confirms
- SABLIER WALL LIGHT: The SABLIER Wall Light is inspired by the silhouette of an hourglass, with oversized frosted glass shades and solid brass components. The hourglass form is symmetrical, so it reads well from both directions on a stair—an important quality when the fitting will be seen from above and below.

SABLIER WALL LIGHT - SABLIER WALL LIGHT: The brass elements are sand cast and then CNC machined, with cut-out detailing on the backplate. The backplate detailing adds depth to the wall, so consider how the light will graze the wall surface around the fitting.
- SABLIER WALL LIGHT: The SABLIER is available in Brushed Brass, Antique Brass, Dark Bronze and Satin Nickel, all with frosted shades. Finish choice affects how the fitting sits against stair wall colours and how much contrast it creates with the handrail and surrounding joinery.
- SABLIER WALL LIGHT: Standard lead time is 10 to 12 weeks plus shipping. Stair and landing projects often run to a schedule, so order early enough to avoid holding up the electrician.
Choosing a finish for stair and landing walls
Stair walls are often painted in stronger colours or finished with panelling, and the SABLIER's four finishes behave differently against those backgrounds. Brushed Brass and Antique Brass bring warmth and reflect light; Dark Bronze recedes into shadowed corners; Satin Nickel is the most neutral and suits cooler colour schemes. If the stair receives little natural light, a warmer finish may help the fitting feel less severe. If the wall is already busy with artwork or a strong paint colour, a darker finish can keep the composition calm.
The frosted shades are common to all four variants, so the quality of light will be consistent. The decision is primarily about how the metal reads against the wall and how it relates to other metals in the stair, such as the handrail or stair rods.
A sequence for planning a SABLIER installation
- 1. Photograph the stair from three angles: Take pictures from the bottom, the middle and the landing. Mark candidate positions on the photos to compare options without moving a ladder repeatedly.
- 2. Check the wall construction: Confirm what the wall is built from and whether it can carry the fitting. The supplied record does not include mounting hardware or weight, so ask your electrician to assess this.
- 3. Confirm electrical requirements: The SABLIER is a mains-powered wall light. Installation must be carried out by a qualified installer in line with local regulations. The supplied record does not include wiring instructions or circuit requirements, so these must come from the manufacturer or your electrician.
- 4. Resolve switching and dimming before plastering: Decide where the switch will be and whether dimming is required. The record does not confirm dimming compatibility, so verify this before the wall is made good.
- 5. Order with lead time in mind: With a 10 to 12 week lead time plus shipping, place the order before the electrical first fix if you want the fitting on site for second fix.
What to confirm before you commit
The supplied product information describes the SABLIER's design, materials, finishes and lead time, but it does not include dimensions, weight, bulb type, wattage, dimming compatibility or installation instructions. Those details are essential for a stair or landing installation, where clearance and fixing method matter. Ask your electrician to review the manufacturer's full specification before ordering, and keep a copy on site for the installer.
If you are planning multiple wall lights for a stairwell, treat the SABLIER as a focal piece rather than one of a row. Its sculptural form and oversized shades are designed to be seen individually, so give it space and let the stair's architecture do the rest.

